List of products by brand Jung

Rotary dimmer Universal LED, insert, with incremental encoder and auxiliary point input, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 20 mm diameter

Universal, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: max. 0.2 W, contact type: μ, operation with suitable attachment, automatic control via timer, operation as main point or side point possible, wind alarm locking via the side point input, via side points input, integration into group or central controls is possible, conversion function of the outputs for simplified start-up. 120 s, connection: screw clamps: 0.75 to 4 mm2 (inertial,) 0.75 to 2.5 mm2 (inertial with end sleeve,) connection power: motors: 700 W, ambient temperature: - 5 to + 45°C, for controlling electrically operated blinds, roller shutters and awnings

3-wire, application, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 0,3 W, connection: screw clamps, 1 x 0.5 to 4 mm2 or 2 x 0.5 to 2.5 mm2 (inertial and intact without end sleeve) and 1 x 0.5 to 4 mm2 or 2 x 0.5 to 1.5 mm2 (inertial with end sleeve,) total length side contact line: maximum 100 m, ambient temperature: - 5 to + 45 °C, for side contact control of a rotary dimmer

Locking plate

Connector, for water-protected devices WG 600

Number of hours

Rotary dimmer, with pressure interchanger, rated voltage: AC 230/240 W ~, 50 Hz, connection power: 230/240 V-Glüh- und -Halogenlampen 100 to 1000 W, mixed loads of specified load types, minimum load: 100 W, maximum clamping power cross-section: 2 x 2.5 mm2 or 1 x 4 mm2, alternating circuit via mechanical interchanger, alternating circuit with 2 dimmers not allowed

Rotary dimmer, with pressure interchanger, rated voltage: AC 230/240 W ~, 50 Hz, connection power: 230/240 V-Glüh- und -Halogenlampen 100 to 1000 W, mixed loads of specified load types, minimum load: 100 W, maximum clamping power cross-section: 2 x 2.5 mm2 or 1 x 4 mm2, alternating circuit via mechanical interchanger, alternating circuit with 2 dimmers not allowed

Switch actuator, 2x, UP, with integrated bus coupler, with branch connection, ETS product family: output, product type: binary output 2x, supply KNX: voltage: DC 21 to 32 W =, power consumption: typical 150 mw, connection: prefabricated line, YY 6 x 0.6, approx. 33 cm long, capable of being extended to a maximum of 5 m, output: number 2, switch type: 2 closers (potential-free relay contacts, -?contacts,) maximum switching voltage: AC 230 W ~, maximum switching current: 2 x 6 A at AC 230 W ~, switching power: incandescent lamps 1200 W, HV halogen lamps 1200 W, NV halogen lamps 500 VA (conventional transformer)

Range/line coupler, REG, ETS product family: system equipment, product type: line coupler, supply: DC 21 to 32 W ~ over the superordinate line, current consumption: approx. 6 ma (above line and approx. 8 ma (subordinate line,) ambient temperature: - 5 to + 45° C., width: 2 TE, use as line coupler (connection of a line with a main line, with or without filter function)

Wrapped lamp (maximum)

Witching type: 8x, REG, with integrated bus coupler, ETS product family: output, product type: binary output 8x, supply KNX: voltage: DC 24W = (+6W / -4W,) power consumption: typical 150mw, connection: KNX connection and branch terminal 2050 RT SW, output: number 8, switch type: 8 switch contacts

Electronic potentiometer, with switching function, for controlling LS lamps, max. 6 A, control current: max. 50 ma, minimum control voltage: 0.7 W, maximum control voltage: 12 W, for Ewgs and/or electronic transformers with 1 to 10 V control inputs

Switching capacity: 48 mm

Switching capacity: 48 mm