List of products by brand ABB

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

Safe and reliable: Highest degree of insulation IP20, gag lock, pluggable connections. User-friendly. Multifunctional: Mounting the remote drive on both sides possible, A device type for all main functions, remote triggers and undervoltage triggers, auxiliary functions. Easy to install: Both pin and fork connections can be used, high tightening torque 4.5 Nm, Generously dimensioned connection terminals cable protection switch 35mm2.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.Product description on the Manufacturer page

Safe and reliable: Highest degree of insulation IP20, gag lock, pluggable connections. User-friendly. Multifunctional: Mounting the remote drive on both sides possible, A device type for all main functions, remote triggers and undervoltage triggers, auxiliary functions. Easy to install: Both pin and fork connections can be used, high tightening torque 4.5 Nm, Generously dimensioned connection terminals cable protection switch 35mm2.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

Auxiliary switch for right-hand connection to circuit breakers, F200 to 100 A, FI/LS combinations DS200 (DDA200 + S200) and load disconnector SD200. Function S2C-H6R: Displays the switching position of the device contacts.Product description on the Manufacturer page

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

These devices are specially designed for switching loads and reporting electrical conditions in a low-voltage switchgear. Depending on the contact layout, they are available as half or entire modules. Devices with light detectors have an LED that ensures optimal luminance with very low consumption. For example, such devices are used to switch displays or other electrical components (such as fans, air conditioning systems).

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.