List of products by brand ABB

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.Product description on the Manufacturer page

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.Product description on the Manufacturer page

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)Product description on the Manufacturer page

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)Product description on the Manufacturer page

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN VDE 0100-430 and DIN VDE 0100-530. They meet the construction requirements DIN VDE 0641-11 and IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

The DALI USB interface between PC (USB) and DALI,Supply: from DALI line and USB interface,Power consumption: ma 6 (DALI line),Inputs: USB (Personal Computer) 1,Outputs; DALI 1,temperature: permissible ambient temperature 0-50°C

The magnetic safety transformer Si-TR400-230/12Lv for the operation of low-voltage halogen lamps 12W, up to 400 Watt, protective lens II, is protected insulated, 230V/11,5V 50/60Hz, in compact and casting resin-reinforced design, 100x128x165mm (Hxbxl), dimmable over phase section, with thermal protection and primary protection

The magnetic safety transformer Si-TR100-230/12Lv for the operation of low-voltage halogen lamps 12W, up to 100 Watt, protective lens II, is protected insulated, 230V/11,5V 50/60Hz, in compact and casting resin-reinforced design, 67x75x89mm (Hxbxl), dimmable over phase section, with thermal protection and primary suitable for precision protection

Small contactors B/BC 6 and B/BC 7 of 4 and 5.5 kw AC-3 (400 W) stand for a series with very small dimensions and with connection variants in screw, soldering and flat plug technology. As a result, and through a variety of contact and coil variants, a very wide range of applications is also available under unfavorable space conditions. With their AC or DC control, they switch power circuits with motors, slightly inductive or non-inductive loads. Attachable accessories are extinguishing elements as well as laterally or front-mounted 2-pin auxiliary switches.

Small contactors B/BC 6 and B/BC 7 of 4 and 5.5 kw AC-3 (400 W) stand for a series with very small dimensions and with connection variants in screw, soldering and flat plug technology. As a result, and through a variety of contact and coil variants, a very wide range of applications is also available under unfavorable space conditions. With their AC or DC control, they switch power circuits with motors, slightly inductive or non-inductive loads. Attachable accessories are extinguishing elements as well as laterally or front-mounted 2-pin auxiliary switches.

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

Actuating lock for automatic fuses and switches. To protect against unauthorized or dangerous actuation of the shift lever. An adapter allows locking of the switching lever both in the switched-off and in the switched-on state. The locking is effected by means of a padlock with a bracket diameter of max. 3 or 6 mm. In multi-pole devices, it is possible to provide 1 lock per pole each. The actuating lock is suitable for all automatic locking devices of the S200 and S 280 series, RCBO DS201-DS202C and switch E 200 .

Actuating lock for automatic fuses and switches. To protect against unauthorized or dangerous actuation of the shift lever. An adapter allows locking of the switching lever both in the switched-off and in the switched-on state. The locking is effected by means of a padlock with a bracket diameter of max. 3 or 6 mm. In multi-pole devices, it is possible to provide 1 lock per pole each. The actuating lock is suitable for all automatic locking devices of the S200 and S 280 series, RCBO DS201-DS202C and switch E 200 .

Actuating lock for automatic fuses and switches. To protect against unauthorized or dangerous actuation of the shift lever. An adapter allows locking of the switching lever both in the switched-off and in the switched-on state. The locking is effected by means of a padlock with a bracket diameter of max. 3 or 6 mm. In multi-pole devices, it is possible to provide 1 lock per pole each. The actuating lock is suitable for all automatic locking devices of the S200 and S 280 series, RCBO DS201-DS202C and switch E 200 .