List of products by brand ABB

Safe and reliable: Highest degree of insulation IP20, gag lock, pluggable connections. User-friendly. Multifunctional: Mounting the remote drive on both sides possible, A device type for all main functions, remote triggers and undervoltage triggers, auxiliary functions. Easy to install: Both pin and fork connections can be used, high tightening torque 4.5 Nm, Generously dimensioned connection terminals cable protection switch 35mm2.

FI/LS switches (RCBOs) offer personal and property protection as well as protection against electrically ignited fires according to DIN VDE 0100-410 and DIN VDE 0100-530. They ensure protection of single-phase circuits against overload and short-circuit currents, protection with sinusoidal alternating currents and pulsating currents with smooth direct fault current of up to 6 mA against ground. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 mA) and fire protection (with I?n = 300 mA). They meet product standards IEC/EN 61009-1 (VDE 0664-20), IEC/EN 61009-2-1 (VDE 0664-21). Areas of use are household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the DS201 fit for worldwide use. Measurement switching capacity according to IEC/EN 61009 Icn = 6 kA. RCBO DS201 A Type A is 1 pole protected (LS), switching 2 poles.Product description on the Manufacturer page

2-pole contactor ESB20 with 18 mm width control 1-phase loads up to 20 A and are available in different contact occupancy and AC coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives, as well as lighting ESB20 have installation design and meet, among other things, the EN61095 household standard, so they are particularly suitable for distribution installation.Product description on the Manufacturer page

4-polige Schütze ESB40 mit 54 mm Baubreite steuern 3-phasige Lasten bis 40 A (Ö-Kontakte bis 30 A) und stehen in unterschiedlichen Kontaktbelegungen und Spulenspannungen zur Verfügung. Sie schalten elektrische Heizgeräte, Warmwasserbereiter, Motoren für Pumpen, Lüftung und sonstige Antriebe ebenso wie Beleuchtungen. Durch eine integrierte Spulenbeschaltung arbeiten sie sowohl mit AC- als auch mit DC-Steuerspannungen. Die Geräte sind deshalb absolut brummfrei und leise beim Schalten. Zubehör wie Hilfsschalter, Plombierkappen und ein Distanzstück ergänzen das Sortiment ESB40 haben Installationsdesign und erfüllen u.a. die Haushaltsnorm EN61095, sie sind daher besonders geeignet für den Verteilereinbau.Produktbeschreibung auf der Herstellerseite

Error current protection switches (RCCBs) offer personal and material protection as well as protection against electrically ignited fires according to DIN VDE 0100-410 and DIN VDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents and pulsating currents. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 mA) and fire protection (with I?n = 300 mA). They meet product standards IEC/EN 61008-1, 61008-2-1, 61543 (VDE 0664 10, 11, 30) and F200 A to 100 A UL 1053. Areas of use are household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the F200 fit for worldwide use. Optimum compromise between safety and operating continuity thanks to the interference resistance against unintentional triggering with impact current strength (stoke current form 8/20 μs) = 5000 A. selectivity with downstream devices with a smaller dimension fault current of, for example, 30 mA (see selectivity tables Catalogue Chapter Technik).Product description on the Manufacturer page

Error current protection switches (RCCBs) offer personal and material protection as well as protection against electrically ignited fires according to DIN VDE 0100-410 and DIN VDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents and pulsating currents. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 mA) and fire protection (with I?n = 300 mA). They meet product standards IEC/EN 61008-1, 61008-2-1, 61543 (VDE 0664 10, 11, 30) and F200 A to 100 A UL 1053. Areas of use are household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the F200 fit for worldwide use.Product description on the Manufacturer page

Error current protection switches (RCCBs) offer personal and material protection as well as protection against electrically ignited fires according to DIN VDE 0100-410 and DIN VDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents and pulsating currents. As well as fault protection (protection for indirect touching), additional protection (with IΔn ≤ 30 mA) and fire protection (with IΔn ≤ 300 mA). They meet product standards IEC/EN 61008-1, 61008-2-1, 61543 (VDE 0664 10, 11, 30) and F200 A to 100 A UL 1053. Areas of use are household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the F200 fit for worldwide use.

Sealing cap ESB-PLK24 prevents unauthorized manipulation of the connection terminals at 24 A and 25 A installation protectors.

Sealing cap ESB-PLK40/63 prevents unauthorized manipulation of the connection terminals at 40 A and 63 A installation protectors.

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

for opening monitoring windows, doors complete for screwing or drilling. Content: 1 magnet, 1 reed contact with 4.0 m connection cable LIJY 4 x 0.14 mm2, 2 housings, 2 spacer plates, 2 flanges, 4 fastening screws antimagnetic. VdS No. G 191549. Wds Kl. B.

for opening monitoring windows, doors complete for screwing or drilling. Content: 1 magnet, 1 reed contact with 4.0 m connection cable LIJY 4 x 0.14 mm2, 2 housings, 2 spacer plates, 2 flanges, 4 fastening screws antimagnetic. VdS No. G 191549. Wds Kl. B.

Water detector SWM 4/RN, connectable to any supply voltage in the range of 10 ... 23 W DC, has potential-free relay output as changer, an LED parallel output and LED display. The detector is automatically reset when drying.

Serves the overvoltage protection of EIB/KNX components.

The universal interface has 4 channels. These can be parameterized with the aid of the ETS as input or output. Conventional probes, auxiliary contacts, light-emitting diodes and the electronic relay ER/U 1.1 can be connected to the connection lines. These can be extended up to 10 m. The contact interrogation voltage and the supply voltage for the Leds are provided by the device, the resistors for the Leds are integrated.