bumper connectors for gratings in screwed design, for straight connections of grating channels and for the production of molded parts, inclusive flat round screw FRS M6 x 20 with combination nut.
The T-series cable branch boxes are all UV-resistant. They consist of a thermoplastic polypropylene with plug-in seals of ethylene vinyl acetate EVA. This plastic is soft, that is, it can move. Thus, lines through the 7×M25 seals can be installed or the seals are cut in with a knife at the intended points in order to produce an insertion opening for lines or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5 x 9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 77x77x46 mm
The T-series cable branch boxes are all UV-resistant. They consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. This plastic is soft, that is, it can move. Thus, lines can either be installed directly through the 4 x M25 seals or the seals can be cut in with a knife at intended points in order to produce an insertion opening for lines or for pipes. In addition, cable screw connections can be inserted through the openings instead of the seals and can be constricted from the inside with a mating nut. The cable branch boxes can be screwed onto both an M6 thread and with sheet metal screws 3,5 x 9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: Ø63x45 mm cover with label field.