List of products by brand Berker

socket SCHUKO 3 times horizontal with hinged lid AP Berker W.1 grey/light grey mpre-wired, with cable entry for 2 cables and cable entry for cable or pipe, stainless steel housing screws, with Wago 2-wire connection terminal, additional Wago 2-wire connecting terminal lockable.

Combination serial switch/socket socket SCHUKO with hinged lid AP Berker W.1 grey/lCommon input terminal. With cable entry for 2 cables and cable entry for cable or pipe. Stainless steel housing screws. With Wago 2-wire connection terminal, additional Wago 2-wire connecting terminal lockable.

Frequency - Hz DALI voltage 16 V DC (9.5 ... 22.5 V=) current consumption
Technical data: - 16 V= - cable length Dali at 1.5 mm2 max. 200 m

socket SCHUKO with hinged lid AP Berker W.1 grey/light grey mattwith cable entry for 2 cables and cable entry for cable or pipe, stainless steel housing screws Wago 2-wire connection terminal, additional Wago 2-wire connecting terminal lockable.

USB/3.5 mm audio socket Berker S.1/B.3/B.7 polar white, mattUSB/3.5 mm audio socket Berker S.1/B.3/B.7 polar white, matt frequency range Audio 20 ... 20 KHz transmission rate (USB) max. 480 MBit/s For the connection of mobile devices, such as mobile phones or MP3 players (mini audio), digital cameras and computer peripherals (USB 2.0). Note information from cable and device manufacturers for maximum USB cable length! - USB double socket type A, USB 2.0 capable - double jack gilded 3.5 mm, stereo - without spreader claws

USB/3.5 mm audio socket Berker S.1 white, glossyUSB/3.5 mm audio socket Berker S.1 white, glossy frequency range Audio 20 ... 20 KHz transmission rate (USB) max. 480 MBit/s For the connection of mobile devices, such as mobile phones or MP3 players (mini audio), digital cameras and computer peripherals (USB 2.0). Note information from cable and device manufacturers for maximum USB cable length! - USB double socket type A, USB 2.0 capable - double jack gilded 3.5 mm, stereo - without spreader claws

Info light signal attachment with 5 font films Berker S.1 white, glossyInfo light signal attachment with 5 font films Berker S.1 white, shiny - with 4 light-strength LED - very long LED life - with aperture clear - current consumption 25 mA - LED power 800 mW enclosed fonts: Do not enter, occupied, please enter, please rest, please wait.

S1 / B1 CSTK.BERKER S.1/B.1/B.7 Shk

rotary dimmer NV with soft grid, with pressure off/change switch, short-circuit-proof and overload-proof, with backup, Phase cut, with clamp for basic load of power-free switching machine, with Plug clamps. (for order number 1130 .., 1134 .., 1135 .., 1137 ..). Voltage testing without expansion possible, safety change without disassembly Cover possible. With too high switch-on currents, switch-on current limiters Use order no.0185.Technical data:230 V ~, 50Hz, incandescent and HV halogen lamps 20-500 W,dimmable conventional transformers 20-500 VA, max. 10Eb/REG can be connected.

Temperature controller with opener, central piece, rocker switch and LED Berker S.1 white,room temperature controller with opener, central piece, winder and LED Berker S.1 white, shiny - with imprint - regulating knob with temperature range limitation - with in/off switch and control LED for in - with thermal return - with separate connection for night reduction - e.g. for actuators closed without current - without expansion claws - with plug clamps 5 - 30 °C, 50/60 Hz rated voltage 250 V~ switching current 10 A inductive load at cos phi 0.6. 4 A switching temperature difference about 0.5 °C night reduction about 4°C neutral conductor required! When the set temperature is reached, the contact opens.

Temperature controller with opener, central piece, rocker switch and LED Berker S.1 / B.3 / Broom temperature controller with opener, central piece, winder and LED Berker S.1/B.3/B.7 polar white, shiny - with imprint - regulating knob with temperature range limitation - with in/off switch and control LED for one - with thermal return - with separate connection for night reduction - for example for adjusting drives closed without current - without spreading claws - with plug clamps 5 - 30 °C, 50/60 Hz rated voltage 250 V~ switching current 10 A inductive. 4 A switching temperature difference about 0.5 °C night reduction about 4°C neutral conductor required! When the set temperature is reached, the contact opens.

Temperature controller with opener, central piece, rocker switch and LED Berker S.1 / B.3 / Broom temperature controller with opener, central piece, winder and LED Berker S.1/B.3/B.7 polar white, matt - with imprint - regulating knob with temperature range limitation - with in/off switch and control LED for in - with thermal return - with separate connection for night reduction - e.g. for actuators closed without current - without expansion claws - with plug clamps 5 - 30°C, 50/60 Hz nominal voltage 250 V~ switching current 10 A inductive load at. 4 A switching temperature difference about 0.5 °C night reduction about 4°C neutral conductor required! When the set temperature is reached, the contact opens.

Temperature controller with changer and central unit Berker S.1 white, glossyroom temperature regulator with changer and central unit Berker S.1 weis, shiny - with imprint - regulating knob with temperature range limitation - for heating or cooling operation - for example for actuators - closed without current - with thermal return - without expansion claws - with plug terminals 5 - 30°C nominal voltage 250 V~, 50/60 Hz switching current heating 10 A (4 A at cosphi=0,6) switching current cooling 5 A (2 A) at approx. 0.5 °C neutral conductor required! When the set temperature is reached, the contact changes.

Temperature controller with changer and central unit Berker S.1/B.3/B.7 polar white, smoothroom temperature regulator with changer and central unit Berker S.1/B.3/B.7 polar white, glossy - with imprint - regulating knob with temperature range limitation - for heating or cooling operation - for example for actuators - closed without current - with thermal return - without expansion claws - with plug terminals 5 - 30°C nominal voltage 250 V~, 50/60 Hz switching current heating 10 A (4 A at cosphi=0,6) switching currents. 0.5 °C neutral conductor required! When the set temperature is reached, the contact changes.

Temperature controller with changer and central unit Berker S.1/B.3/B.7 polar white, matroom temperature regulator with changer and central unit Berker S.1/B.3/B.7 polar white, matt - with imprint - regulating knob with temperature range limitation - for heating or cooling operation - for example for actuators - closed without current - with thermal return - without expansion claws - with plug terminals 5 - 30°C nominal voltage 250 V~, 50/60 Hz switching current heating 10 A (4 A at cosphi=0,6) switching currents cooling A. 0.5 °C neutral conductor required! When the set temperature is reached, the contact changes.