List of products by brand Berker

Blindfold Berker S.1/B.3/B.7 polar white, glossyFor Busan Coupler Up

Blindfold Berker S.1/B.3/B.7 polar white, mattFor Busan Coupler Up

probe dimmer (R, L); Electronic platform 2012; lower own energy requirements; switch-on brightness can be stored reliably; soft start; Phase cut; short-circuit-resistant and overload-proof (electronic fuse); with auxiliary point input for pushbutton (closer) with single-surface operation and motion detector; also suitable for Fit matching KNX radio attachments; expandable by Universal performance add-ons Plus REG; no conductive connection between support ring and Expanding claws; with screw clamps.Operating voltage: 230 V~Frequency: 50/60 HzPower consumption (standby): 230 V bulbs and halogen lamps: 25 ... 400 Wdimmable, conventional transformers: 25 ... 400 VAOperating temperature: -5 ... +45 °CNumber of auxiliary points: unlimitedLine length side points: max. 50 mLoad line length: max. 100 mScrew terminals: max. 1 x 4 / 2 x 2,5 mm2Installation depth: 32 mm

Antenna socket 2Loch single box, for community and broadband cable systems, for SAT single and distribution systems, for terrestrial reception, in star structure or decoupled stub lines, remotely fed via output socket, DC voltage permeable. In accordance with DIN IEC 169-2 and EN 50083 Part 1.(Not suitable as end dose). For coaxial cable 75 ohm, broadband technology 4 - 2400 MHz, connection attenuation 2 - 4 dB, return channel suitable 2 - 2400 MHz.

Wippen S.1.B.3 anthracite, for rocker switches and whip pentast switches, whip pentasters, group whip pentasters, pusher-BA 2x and group scanner-BA 2x, underput installation, area/design program.

Serial switch AP Berker W.1 grey/light grey mattwith cable entry for 2 cables and cable entry for cable or pipe

Blind series switch 1-pole with imprint Symbol arrows AP Berker W.1 grey/liwith cable entry for 2 cables and cable entry for cable or pipeAP

Switch illuminated AP Berker W.1grey/light grey mattwith cable entry for 2 cables and cable entry for cable or pipe

Switching switch AP Berker W.1 grey/light grey mattwith cable entry for 2 cables and cable entry for cable or pipe

Rated voltage: 250 V ACSwitching current: 10 AXOperating temperature: -40/60 °C lens with full-surface seal on the rear side of the housing for rear line introduction and cleaning compensation with 2 snap-in places for Wago 2-wire connection clamps in housing bottom with Wago 2-wire connection terminal with {b rotem} LED Aggregat 230 V for control circuit with an introduction for 2 lines and an introduction for pipe or pipe with connectors with N-terminal ZAMAK quick release pins.

socket SCHUKO with hinged lid AP Berker W.1 grey/light grey mattwith cable entry for 2 cables and cable entry for cable or pipe, stainless steel housing screws Wago 2-wire connection terminal, additional Wago 2-wire connecting terminal lockable.

socket SCHUKO with hinged lid AP Berker W.1 grey/light grey mattwith cable entry for 2 cables and cable entry for cable or pipe, stainless steel housing screws Wago 2-wire connection terminal, additional Wago 2-wire connecting terminal lockable.

socket SCHUKO 3 times horizontal with hinged lid AP Berker W.1 grey/light grey mpre-wired, with cable entry for 2 cables and cable entry for cable or pipe, stainless steel housing screws, with Wago 2-wire connection terminal, additional Wago 2-wire connecting terminal lockable.

IP55Nennial voltage: 250 V ACRated current: 16 ASwitching current: 10 AXOperating temperature: -40/60 °C with full-surface seal on the rear side of the housing for rear line introduction and cleaning compensation with falling flap cover, manually lockable for vertical mounting Switch and socket separately connectable with an introduction for 2 lines and an introduction for pipe or pipe with connectors Stainless steel hinged cover springs, pins of the ZAMAK quick release. grey/light grey matt

IP55Nennial voltage: 250 V ACRated current: 16 AOperating temperature: -40/60 °CConnection terminals: according to VDE 0620-1 with full-surface seal on the rear side of the housing for rear line introduction and cleaning compensation with falling flap cover, manually lockable with 2 snap-in places for Wago 2-wire connection clamps in housing bottom with Wago 2-wire connection terminal for horizontal mounting with an introduction for 2 lines and an introduction for pipe or pipe Wired inserts with connectors The upper and lower introduction for lines are arranged laterally offset and are therefore particularly suitable for mounting next to door frames or the like. Stainless steel hinged cover springs, pins of the ZAMAK quick release. grey/light grey matt 2 line introductions