Schneider

Motor protection switch with thermal and magnetic triggering These devices are easy to use and set up, with compact and ergonomic products for requirements in the field of starter motors and stop motors.

0.06 -75 kW In addition to appealing and functional design, the TeSys D shooter offers fast and easy installation with a narrow overall width of 45 or. 55 mm. They meet international standards. The power sizes 40 to 65 A are equipped with EverLink terminals. These are patented and ensure a reliable and durable connection.

Error current circuit breaker ID K, 4P, 40A, 30mA, type A. Series: Acti 9 - Product or component type: Earth circuit protection - Short description of the device: ID K - Description of the pole: 4P - Neutral position: left - Network type: AC - Nominal substrate. Idm 500 A, In 500 A - Bed. Measured short-circuit current: with gL63 : Inc 4.5 kA, with K60 : Inc 6 kA.

AMIGO small distributor, 3-row, HW. Product or component type: Cabinet - Width: 310 mm Breakouts, 344 mm frame - Height: 570 mm Breakouts, 624 mm frame - depth: 88 mm Breakouts, 11 mm frame - delivered equipment: Clamping bar (3), gypsum board mounting kit (1), label (1). Your benefit:Available in four versions and as a multimedia distributorEasy mountingStable and break resistantSpacious wiring roomsAlongside each other can be arranged flushPrecious line introduction slidersLockable and fast mountable clampsExtendable hat rail from 12 to 14 TEFunctional contact protection coverPreliminaries for cableSpacers available for cleaningFrame horizontal alignmentDoor with elegant snap closureLock interchangeableMobile LibellaSimple door stop change left or rightStorage-friendly cardboard with integrated cleaning protection
.. Applications:HousingConstructionLow-voltage switchgear
.. Your benefit: solution, through 50 years of experience of Schneider Electric and ABN is supported in the development and production of electrical protection devices, measurement and distribution systems Schneider Electric Equipment according to EN 61439-3.. Applications: indoor and outdoor facilitiesElectrical distribution, measurement and multimediaFor residential and commercial buildingsFor a new energy landscape.

Error current circuit breaker ID K, 4P, 63A, 30mA, type A. Series: Acti 9 - Product or component type: Earth circuit protection - Short description of the device: ID K - Description of the pole: 4P - Neutral position: left - Network type: AC - Nominal substrate. Idm 500 A, In 500 A - Bed. Measured short-circuit current: with gL63 : Inc 4.5 kA, with K60 : Inc 6 kA.

AMIGO small distributor, 4-row, UP. Product or component type: Cabinet - Width: 330 mm niche, 344 mm frame - Height: 749 mm frame, 710 mm niche - depth: 11 mm frame, 90 mm niche - delivered equipment: Clamping bar (3), type label (1), gypsum board mounting kit (1). Your benefit:Available in four versions and as a multimedia distributorEasy mountingStable and break resistantSpacious wiring roomsAlongside each other can be arranged flushPrecious line introduction slidersLockable and fast mountable clampsExtendable hat rail from 12 to 14 TEFunctional contact protection coverPreliminaries for cableSpacers available for cleaningFrame horizontal alignmentDoor with elegant snap closureLock interchangeableMobile LibellaSimple door stop change left or rightStorage-friendly cardboard with integrated cleaning protection
.. Applications:HousingConstructionLow-voltage switchgear
.. Your benefit: solution, through 50 years of experience of Schneider Electric and ABN is supported in the development and production of electrical protection devices, measurement and distribution systems Schneider Electric Equipment according to EN 61439-3.. Applications: indoor and outdoor facilitiesElectrical distribution, measurement and multimediaFor residential and commercial buildingsFor a new energy landscape.

Device position in the systemDateNetwork frequency50/60 HzOperating measurement voltage Ue230 V AC 50/60 HzLimit of magnetic triggering3... 5 x inresidual current release technologyVoltage independentBem.-Betr.-off switch. Ics7500 A 75% Icn at 230 V AC 50/60 Hz corresponds to EN/IEC 61009-2-1Nominal and triggering cap.Idm 6000 A at 230 V AC 50/60 Hz corresponds to EN 61009-2-1Idm 500 A at 230 V AC 50/60 Hz corresponds to IEC 61009-2-1Limiting class3 conforming to EN/IEC 61009-2-1Rated insulation voltage Ui400 V AC 50/60 HzMeasuring impact strength [Uimp]4 kVPlus contact displayYesType of operationSafety switchDisplay on the deviceON/OFF displayError messageAssembly variantScrew terminalsMounting mountDIN railCam rail and distributor block CompatibilityTop or bottom: Zinc9-mm grid4Height85 mmWidth36 mmDepth74 mmProduct weight210 gColourWhiteMechanical life20000 cyclesElectrical life20000 cyclesDescription of locking optionsPlombableLocking deviceConnections - TerminalsTunnel clamps on top or bottom1...16 mm2 fixedTunnel clamps on top or bottom1...10 mm2 flexibleWire insulation length14 mm for top or bottom connectionSuction torque2 Nm up or downEarthlock protectionIntegratedAssemblyStandardsEN/IEC 61009-2-1Product certificationsTHEType of protection (IP)IP20 corresponds to IEC 60529IP40 (modular housing) corresponds to IEC 60529Pollution3Overvoltage categoryconforming to IEC 60364electromagnetic compatibility8/20 μs impulse withstand, 250 A conforming to EN/IEC 61009-2-1Relative humidity95% at 55° CInstallation height2000 mAmbient temperature during operation-25...60 °CAmbient temperature in storage-40...85 °C9.9 cmPackaging unitsPackaging type VPE1PCENumber of devices per pack1Packaging weight (Lbs)213 gHeight VPE18.3 cmWidth VPE14,3 cmLength VPE1SeriesActi9Product nameActi9 iCV40Product or component typeOvercurrent protection switch (FI/LS)Short description of the deviceICV40HDescription of the Pole1P + NNumber of protected Poland1neutral positionleftRated current [In]13 ANetwork connectionACTechnology of the triggering unitThermomagneticCharacteristicsBEarth solubility30 mAEarthlock protection time delay.UndelayedEarth-lock protection classType A-GSwitching capacity10000 A Icn at 230 V AC 50/60 Hz corresponds to EN/IEC 61009-2-1Suitability for insulationYes corresponds to EN/IEC 60947-2Quality labelOF

Device position in the systemDateNetwork frequency50/60 HzOperating measurement voltage Ue230 V AC 50/60 HzLimit of magnetic triggering3... 5 x inresidual current release technologyVoltage independentBem.-Betr.-off switch. Ics7500 A 75% Icn at 230 V AC 50/60 Hz corresponds to EN/IEC 61009-2-1Nominal and triggering cap.Idm 6000 A at 230 V AC 50/60 Hz corresponds to EN 61009-2-1Idm 500 A at 230 V AC 50/60 Hz corresponds to IEC 61009-2-1Limiting class3 conforming to EN/IEC 61009-2-1Rated insulation voltage Ui400 V AC 50/60 HzMeasuring impact strength [Uimp]4 kVPlus contact displayYesType of operationSafety switchDisplay on the deviceON/OFF displayError messageAssembly variantScrew terminalsMounting mountDIN railCam rail and distributor block CompatibilityTop or bottom: Zinc9-mm grid4Height85 mmWidth36 mmDepth74 mmProduct weight210 gColourWhiteMechanical life20000 cyclesElectrical life20000 cyclesDescription of locking optionsPlombableLocking deviceConnections - TerminalsTunnel clamps on top or bottom1...16 mm2 fixedTunnel clamps on top or bottom1...10 mm2 flexibleWire insulation length14 mm for top or bottom connectionSuction torque2 Nm up or downEarthlock protectionIntegratedAssemblyStandardsEN/IEC 61009-2-1Product certificationsTHEType of protection (IP)IP20 corresponds to IEC 60529IP40 (modular housing) corresponds to IEC 60529Pollution3Overvoltage categoryconforming to IEC 60364electromagnetic compatibility8/20 μs impulse withstand, 250 A conforming to EN/IEC 61009-2-1Relative humidity95% at 55° CInstallation height2000 mAmbient temperature during operation-25...60 °CAmbient temperature in storage-40...85 °C9.9 cmPackaging unitsPackaging type VPE1PCENumber of devices per pack1Packaging weight (Lbs)213 gHeight VPE18.3 cmWidth VPE14,3 cmLength VPE1SeriesActi9Product nameActi9 iCV40Product or component typeOvercurrent protection switch (FI/LS)Short description of the deviceICV40HDescription of the Pole1P + NNumber of protected Poland1neutral positionleftRated current [In]16 ANetwork connectionACTechnology of the triggering unitThermomagneticCharacteristicsBEarth solubility30 mAEarthlock protection time delay.UndelayedEarth-lock protection classType A-GSwitching capacity10000 A Icn at 230 V AC 50/60 Hz corresponds to EN/IEC 61009-2-1Suitability for insulationYes corresponds to EN/IEC 60947-2Quality labelOF

timer mechanical IH24h 1c SRM, 1 TE, 24h 1 channel -without reserve, protection class IP20B, service life 10 years

0.06 -75 kW In addition to appealing and functional design, the TeSys D shooter offers fast and easy installation with a narrow overall width of 45 or. 55 mm. They meet international standards. The power sizes 40 to 65 A are equipped with EverLink terminals. These are patented and ensure a reliable and durable connection.

Motor protection switch with thermal and magnetic triggering These devices are easy to use and set up, with compact and ergonomic products for requirements in the field of starter motors and stop motors.

AMIGO small distributor, 4-row, AP. Product or component type: Cabinet - supplied equipment: type plate (1), terminal strip (3) - type of front cover: without. Your benefit:Available in four versions and as a multimedia distributorEasy mountingStable and break resistantSpacious wiring roomsAlongside each other can be arranged flushPrecious line introduction slidersLockable and fast mountable clampsExtendable hat rail from 12 to 14 TEFunctional contact protection coverPreliminaries for cableSpacers available for cleaningFrame horizontal alignmentDoor with elegant snap closureLock interchangeableMobile LibellaSimple door stop change left or rightStorage-friendly cardboard with integrated cleaning protection
.. Applications:HousingConstructionLow-voltage switchgear
.. Your benefit: solution, through 50 years of experience of Schneider Electric and ABN is supported in the development and production of electrical protection devices, measurement and distribution systems Schneider Electric Equipment according to EN 61439-3.. Applications: indoor and outdoor facilitiesElectrical distribution, measurement and multimediaFor residential and commercial buildingsFor a new energy landscape.

Mechanical timer, IH 24h 1c ARM, 24h, 200h memory, you work with hours, day or week program: The program is repeated every hour (IH 60 min), every day (IH 24 h) or every week (IH 7 T). The program can be disabled (one).

0.06 -75 kW In addition to appealing and functional design, the TeSys D shooter offers fast and easy installation with a narrow overall width of 45 or. 55 mm. They meet international standards. The power sizes 40 to 65 A are equipped with EverLink terminals. These are patented and ensure a reliable and durable connection.

0.06 -75 kW In addition to appealing and functional design, the TeSys D shooter offers fast and easy installation with a narrow overall width of 45 or. 55 mm. They meet international standards. The power sizes 40 to 65 A are equipped with EverLink terminals. These are patented and ensure a reliable and durable connection.