Muff technology

Incl. Suitable for copper and aluminum conductors, application areas: interior, open air, soil, water and installation equipment etc. Longitudinal and crosswater sealing, good mechanical strength, high-quality transparent, impact-resistant plastic mould shells, immediately ready to use, without cable connectors. Curing time: about 24 hours depending on the outside temperature. Power supply can be switched on immediately after installation of the socket (not to be taken into account). Cable up to mm2: 4 x 50 cable Ø: 21 - 43 mm casting resin: 650 ml

Non-uniform connection and/or branching sleeve, depending on the clamping type for connections and individual branches of plastic cables and lines from PWTSC, PE, EPR and WPE (for example, N(A)YY, NYM, H05) the gel in the shell takes over insulation and sealing of the connection, tested according to DIN EN 5011)393 (corresponding to type 0239). L x B x H: 180 x 69 x 40 mm Cable diameter Main cable: 9 - 22 mm L cross section Main cable: 3x6 - 5x16 mm2

Cable connection sockets For telecommunications and low voltage cables up to 1 kw. Easy and absolutely safe protection for telecommunications and electrical applications (control and supply lines). Specially designed for connection and branch splices. Suitable for free air, shaft and earth installations up to max. 5m. Reopenable and reusable at any time. Absolutely close to water entry - protection: IP68. Color: yellow/black. Tested according to IEC 60670-22. Earthic acid and corrosion resistant, rotable dustproof. UV-resistant. It consists of three parts: sleeve body, rubber end cap and lid. Cable ties, lubricants and a cutting blade are included. Total length: 285 mm cable Ø 4x.: 7 - 25 mm max. Ø : 100 mm

Non-uniform connection and/or branching sleeve, depending on the clamping type for connections and individual branches of plastic cables and lines from PWTSC, PE, EPR and WPE (for example, N(A)YY, NYM, H05) the gel in the shell takes over insulation and sealing of the connection, tested according to DIN EN 5011)393 (corresponding to type 0239). L x B x H: 220 x 110 x 53 mm Cable diameter Main cable: 9 - 20 mm L cross section Main cable: 3x6 - 5x6 mm2

Thickness of material: 30 mm

Shrink hose assortment 416 pcs., flexible standard shrunk hose, application area: cable protection, insulation, marking and wrapping, shrink temperature: min. 90°C, flameproof, self-extinguishing, tensile strength: 13 N/mm2, weight: 1.45 g/cm3, impact strength: 20 kV/mm, contents PSB 416S (black, Øxl): color: black, 80x 1,2x50 mm, 1.6x50 mm; 60x 2.4x50 mm, 3.2x50 mm; 45x 4.8x50 mm; 30x 6.9x50 mm; 45x 9.5x50 mm; 8x 12,7x100 mm; 8x 19,1x100 mm Content PSB 416F (brown, blue, green-yellow, Øxl): 20x 1,2x50 mm, 1.6x50 mm; 15x 2.4x50 mm, 3.2x50 mm; 10x 4.8x50 mm; 5x 6,4x50 mm; 15x 9.5x50 mm; 2x 12,7x100 mm; 2x 19,1x100 mm Version: thin-walled With internal adhesive: No Shrink rate: 2:1 Material: polyolefin (PEX) Color: black, brown, blue, green-yellow Content: 20x Ø x L: 1.2 x 50 mm, 20x Ø x L: 1.6 x 50 mm, 15x Ø x L: 2.4 x 50 mm, 15x Ø x L: 3.2 x 50 mm, 10x Ø x L: 4,8 x 50 mm, 5x Ø x L: 6,4 x 50 mm, 15x

Incl. Suitable for copper and aluminum conductors, application areas: interior, open air, soil, water and installation equipment etc. Longitudinal and crosswater sealing, good mechanical strength, high-quality transparent, impact-resistant plastic mould shells, immediately ready to use, without cable connectors. Curing time: about 24 hours depending on the outside temperature. Power supply can be switched on immediately after installation of the socket (not to be taken into account). Cable up to mm2: 4 x 25 cable Ø: 14 - 34 mm casting resin: 370 ml

Shrink hose assortment 416 pcs., flexible standard shrunk hose, application area: cable protection, insulation, marking and wrapping, shrink temperature: min. 90°C, flameproof, self-extinguishing, tensile strength: 13 N/mm2, weight: 1.45 g/cm3, impact strength: 20 kV/mm, contents PSB 416S (black, Øxl): color: black, 80x 1,2x50 mm, 1.6x50 mm; 60x 2.4x50 mm, 3.2x50 mm; 45x 4.8x50 mm; 30x 6.9x50 mm; 45x 9.5x50 mm; 8x 12,7x100 mm; 8x 19,1x100 mm Content PSB 416F (brown, blue, green-yellow, Øxl): 20x 1,2x50 mm, 1.6x50 mm; 15x 2.4x50 mm, 3.2x50 mm; 10x 4.8x50 mm; 5x 6,4x50 mm; 15x 9.5x50 mm; 2x 12,7x100 mm; 2x 19,1x100 mm Version: thin-walled With internal adhesive: No Shrink rate: 2:1 Material: polyolefin (PEX)

Non-uniform connection and/or branching sleeve, depending on the clamping type for connections and individual branches of plastic cables and lines from PWTSC, PE, EPR and WPE (for example, N(A)YY, NYM, H05) the gel in the shell takes over insulation and sealing of the connection, tested according to DIN EN 5011)393 (corresponding to type 0239). Main cable: 9 - 20 mm L cross section Main cable: 3x1.5 - 5x6 mm2 L x B x H: 146 x 55 x 35 mm

Gas and longitudinal water-tight to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 15 - 41 mm Length: 800 mm Minimum diameter Wall breakage: 70 mm Colour: black

0,6/1 kw (1,2kV) For 4- and 5-core plastic-insulated cables, made of high-quality crosslinked polyofin, shrinkage rate 4:1, continuous use temperature -40°C to +120°C, non-corrosive and cadmium-free, color: black, delivery length: 400 mm cable up to mm2: 4 x 16/4 x 50 sleeve length: 600 mm

Gas and longitudinal water-tight to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 12 - 26 mm Length: 800 mm Minimum diameter Wall breakage: 55 mm Colour: black

Gas and longitudinal water resistant to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 8 - 14 mm Length: 800 mm Minimum diameter Wall breakage: 40 mm Colour: black

Replacement casting resin EG is suitable for the following types of cables: plastic and paper-insulated low-voltage cables up to 1kw. Plastic and paper-insulated telecommunication and message cables. medium-voltage cable as mechanical protection and moisture protection, replacement casting resin for PGM casting resin sleeves, content: 286 ml, 2-component PUR casting resin, in the practical two-chamber mixing bag, good flow behavior. Curing time: about 24 hours depending on the outside temperature. Halogen-free: Yes

Cable connection sockets For telecommunications and low voltage cables up to 1 kw. Easy and absolutely safe protection for telecommunications and electrical applications (control and supply lines). Specially designed for connection and branch splices. Suitable for free air, shaft and earth installations up to max. 5m. Reopenable and reusable at any time. Absolutely close to water entry - protection: IP68. Color: yellow/black. Tested according to IEC 60670-22. Earthic acid and corrosion resistant, rotable dustproof. UV-resistant. It consists of three parts: sleeve body, rubber end cap and lid. Cable ties, lubricants and a cutting blade are included. Total length: 160 mm cable-Ø 4x.: 5 - 14 mm max. Ø : 70 mm