Metz

Submerged connection unit with one or two 8-pin RJ45 sockets // GHMT Cat.6 12C-de-embedded certified // Compliance with the class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 // Tested: Link up to 500 MHz // for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus) 209 x 294 // integrated dust protection flaps (also available in colour) // compatible with design central pieces of switch programs // Suitable for installation in standard under-put cups and hollow wall cups // Color of the cover parts pearl white RAL 1013 or pure white RAL 9010, surface matt texture // Variants: 1 port, 2 port // Colour variations: pure white and pearl whiteProduct description on the Manufacturer page

Submerged connection unit with one or two 8-pin RJ45 sockets // GHMT Cat.6 12C-de-embedded certified // Compliance with the class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 // Tested: Link up to 500 MHz // for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus) 209 x 294 // integrated dust protection flaps (also available in colour) // compatible with design central pieces of switch programs // Suitable for installation in standard under-put cups and hollow wall cups // Color of the cover parts pearl white RAL 1013 or pure white RAL 9010, surface matt texture // Variants: 1 port, 2 port // Colour variations: pure white and pearl whiteProduct description on the Manufacturer page

channel connection unit with one or two 8-pin RJ45 sockets // GHMT Cat.6 12C-de-embedded // Compliance with the class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 // Tested: Link to 500 MHz // for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus) 209 x 294 // integrated dust protection flaps (also available in colour) // compatible with design central pieces of switch programs // Suitable for installation in standard under-put cups and hollow wall cups // Color of the cover parts pearl white RAL 1013 or pure white RAL 9010, surface matt texture // Variants: 1 port, 2 port // Colour variations: pure white and pearl whiteProduct description on the Manufacturer page

Rigid connection unit with E-DAT module // Cat.6A component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA according to ISO/IEC 11801 Ed.2.2 209 x 294 // Integrated dust protection flaps (also available in colour) // Color of cover parts perlwhite RAL 1013 or pure white RAL 9010, surface matt texture // Variants: 1 port, 2 port, 3 port // Colour variations: pure white and pearl whiteProduct description on the Manufacturer page

Rigid connection unit with E-DAT module // Cat.6A component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA 11801 Ed 209 x 294 // Integrated dust protection flaps (also available in color) // Color of the cover parts perlwhite RAL 1013 or pure white RAL 9010, surface matt texture // compatible with design central pieces of switch programs (Attention 3 Port central pieces currently only available from JUNG) // Not suitable for installation in standard under plaster and hollow wall cups! // Variants: 1 port, 2 port white and 3 port //Product description on the Manufacturer page

Underput connection unit for individual modules in modular design // Plug direction of module 45° inclined downward // Load relief at module // with window for enclosed inscription // Labeling sheet 209 x 294 // Cover parts pure white RAL 9010, pearl white RAL 1013, matt texture // compatible with design central pieces of switch programs (Attention 3 Port central pieces currently only available from JUNG) // Variants: 1 port, 2 port, 3 port // Colour variations: pure white, pearl whiteProduct description on the Manufacturer page

Channel connection unit for individual modules in modular design // Plug direction of module 45° inclined downward // Load relief at module // with window for enclosed labeling insert // Labeling arc 209 x 294 // Cover parts pure white RAL 9010, pearl white RAL 1013, matt texture // compatible with design central pieces of switch programs (Attention 3 Port central pieces currently only available from JUNG) // Variants: 1 port, 2 port, 3 port // Colour variations: pure white, pearl whiteProduct description on the Manufacturer page

Connection unit for individual modules in modular design // Plug direction of module 45° inclined downward // Load relief at module // without cover parts // compatible with design central pieces of switch programs (Achtung 3 Port central pieces currently only available from JUNG) // Variants: 1 /3 Port, 2 PortProduct description on the Manufacturer page

19 inch 1HE module carrier for 24 individual modules in modular design // module carrier front made of silver anodized aluminum // module holder made of plastic with dust protection flaps (further colors available as accessories) removable forward // integrated cable collection, additional strain relief possible // window for enclosed labeling insert // labeling sheet 210 x 297 mm see accessories // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

80W stainless steel module support with 24E-DAT modules // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

IP44 splash housing for two individual modules in modular design // IP44 protection only in closed state (without plugged patch cable) // cable feed for one or two cables from above // break-proof // colour greyProduct description on the Manufacturer page

RJ45 Cable Clutch Cat.6 Class EA // Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 // for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT suitable // full shielded 90° coupling made of zinc die castingProduct description on the Manufacturer page

6 Port-Aufputz Distribution or connection box for structured building wiring // GHMT Cat.6 12C-de-embedded // Compliance with the class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173AW-1:2011-09 // Tested: Link to 500 MHz // for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPE). With marking of the core colors according to TIA/EIA 568A // View windows for enclosed label inserts // additional strain relief by cable tie possible // Variants: pure white, light greyProduct description on the Manufacturer page

// Stable steel plate housing // Housing upper part powder-coated in RAL9010 // easy installation and removal of the housing upper part by screw-free fastening // Potential compensation via flat plugs possible // Additional cable strain relief on the housing lower part with cable tie // The housing is suitable for direct wall mounting, as a desktop and with support rail adapter mini for support rail mounting // The housing bottom of the 3-port and 4-port version can be removed. Here there is the additional fastening option via a 60 mm hole track // Optionally available and usable in all housings: FO extension set for module and Keystone AP housing 130861-MSK-E // Optionally available for housings 2 x 12 Port: Tension relief for patch cables 130861-24ZE-E // Variants: 3, 4, 6, 8, 12, 16 and 2 x 12 PortsProduct description on the Manufacturer page

// Stable steel plate housing // Housing upper part powder-coated in RAL9010 // easy installation and removal of the housing upper part by screw-free fastening // Potential compensation via flat plugs possible // Additional cable strain relief on the housing lower part with cable tie // The housing is suitable for direct wall mounting, as a desktop and with support rail adapter mini for support rail mounting // The housing bottom of the 3-port and 4-port version can be removed. Here there is the additional fastening option via a 60 mm hole track // Optionally available and usable in all housings: FO extension set for module and Keystone AP housing 130861-MSK-E // Optionally available for housings 2 x 12 Port: Tension relief for patch cables 130861-24ZE-E // Variants: 3, 4, 6, 8, 12, 16 and 2 x 12 PortsProduct description on the Manufacturer page