ABB

ABB 2CDG110184R0011 WZ/S1.3.1.2 Weather center, REG
ABB 2CDG110184R0011 WZ/S1.3.1.2 Weather center, REG
2-7 days
The weather center WZ/S collects and processes weather data from the weather sensor. The weather sensor provides the data for dusk, brightness in three directions, rain, temperatures, information about day/night, wind speeds, date and time. There are 4 value stores available, 24 values can be stored per value store. The weather center is matched to the weather sensor WES/A. The integrated power supply supplies the weather sensor directly with voltage. The device can optionally be operated with an operating voltage of 115 to 230 W AC, 50/60 Hz.
€953.86
ABB 2CSF204592R1630 F204B-63/0,03 FI protection switch type B 4P,63A,30mA,short timeverz.,3kA,4TE
ABB 2CSF204592R1630 F204B-63/0,03 FI protection switch type B 4P,63A,30mA,short timeverz.,3kA,4TE
2-7 days
Fault current protection devices (Rccbs) offer personal and property protection as well as protection against electrically ignited fires according to DIN WDE 0100-410 and DIN WDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents, pulsating currents and smooth direct fault currents. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 ma) and fire protection (with I?n = 300 ma). They meet product standards for type A IEC/EN 61008-1, 61008-2-1, 61543 (WDE 0664 10, 11, 30) and type B DIN EN 62423 (WDE 0664-40). Areas of application are predominantly in industrial and commercial applications. The extensive range of accessories offers you everything you need for your installation tasks. The RCCB type B is suitable for non-linear circuits that can generate fault currents with smooth direct fault currents and with different (high/) frequencies. These components are located in electronic operating means such as frequency converters. The RCCB type B has a frequency range of 0...2 khz to detect the fault current and offer a high system availability.
€755.14
ABB 2CDG110134R0011 SA/S8.16.5.1 Switch actuator, 8x, 16/20 AX, C-Last, REG
ABB 2CDG110134R0011 SA/S8.16.5.1 Switch actuator, 8x, 16/20 AX, C-Last, REG
2-7 days
Switches independent electrical consumers via potential-free contacts 12 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16/20AX, 16A-AC3, C-Last series is particularly suitable for switching loads with high turn-on current peaks such as illuminants with compensation capacitors or fluorescent lamp loads (AX) according to DIN EN 60669.
€755.14
ABB 2CDG110199R0011 DG/S2.64.1.1 DALI Gateway, Basic, 2fold, REG
ABB 2CDG110199R0011 DG/S2.64.1.1 DALI Gateway, Basic, 2fold, REG
2-7 days
To drive DALI participants via ABB i-bus®. Two DALI output for max. 2x64 DALI participants. The DALI power supply is integrated. The activation takes place per DALI subscriber (2x64), about groups (2x16), together in the broadcast or through scenes (2x16). Extensive error and interference messages are available. DALI emergency light converter (2x64) are supported in accordance with EN 62386-202. The function test and continuous tests can be triggered via KNX via the emergency light converter and the result can be made available on the KNX. Slave, staircase light, locking and forced guidance function are integrated. The DALI telegram rate is variable. A separate diagnostic and commissioning tool, i-bus tool is available for individual re-addressing of the DALI participants or group assignment.
€735.26
ABB 2CSF204592R3630 F204B-63/0,3 FI protection switch type B 4P,63A,300mA,short timeverz.,3kA,4TE
ABB 2CSF204592R3630 F204B-63/0,3 FI protection switch type B 4P,63A,300mA,short timeverz.,3kA,4TE
2-7 days
Fault current protection devices (Rccbs) offer personal and property protection as well as protection against electrically ignited fires according to DIN WDE 0100-410 and DIN WDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents, pulsating currents and smooth direct fault currents. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 ma) and fire protection (with I?n = 300 ma). They meet product standards for type A IEC/EN 61008-1, 61008-2-1, 61543 (WDE 0664 10, 11, 30) and type B DIN EN 62423 (WDE 0664-40). Areas of application are predominantly in industrial and commercial applications. The extensive range of accessories offers you everything you need for your installation tasks. The RCCB type B is suitable for non-linear circuits that can generate fault currents with smooth direct fault currents and with different (high/) frequencies. These components are located in electronic operating means such as frequency converters. The RCCB type B has a frequency range of 0...2 khz to detect the fault current and offer a high system availability.
€735.26
ABB 2CDG110126R0011 JRA/S8.230.5.1 Blind/roller actuator, driving timer, 8f, 230 V AC, man Bed, REG
ABB 2CDG110126R0011 JRA/S8.230.5.1 Blind/roller actuator, driving timer, 8f, 230 V AC, man Bed, REG
2-7 days
For controlling a maximum of eight independent 230 W AC drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With automatic driving time determination and manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.
€685.58
ABB 2CDG110071R0011 UK/S32.2 Universal E/A Concentrator, 32x, REG
ABB 2CDG110071R0011 UK/S32.2 Universal E/A Concentrator, 32x, REG
2-7 days
The Universal E/A Concentrator is used for connecting probes or signal lamps, e.g. in an operating and display tray. It has 32 channels that can be individually parameterized as inputs or outputs. Needs external 12 or 24 W DC auxiliary voltage .
€625.97
ABB 2CDG110198R0011 DG/S1.64.1.1 DALI Gateway, Basic, 1x, REG
ABB 2CDG110198R0011 DG/S1.64.1.1 DALI Gateway, Basic, 1x, REG
2-7 days
To drive DALI participants via ABB i-bus®. A DALI output for max. 64 DALI participants. The DALI power supply is integrated. The activation can take place per DALI subscriber (64), via groups (16), together in the broadcast or via scenes (16). Extensive error and interference messages are available. DALI emergency light converter(64) according to EN 62386-202 are supported. The function test and continuous tests can be triggered via KNX via the emergency light converter and the result can be made available on the KNX. Slave, staircase light, locking and forced guidance function are integrated. The DALI telegram rate is variable. A separate diagnostic and commissioning tool is provided for individual re-addressing of the DALI participants or group assignment, ABB i-bus tool available.
€616.03
ABB 2CDG110175R0011 IPR/S3.1.1 IP router, REG
ABB 2CDG110175R0011 IPR/S3.1.1 IP router, REG
2-7 days
forms the interface between KNX installations and IP networks and works according to the KNXnet/IP specification (tunneling and routing). The IPR/S can be used as a fast line or range coupler (routing). The complete filter table for all main groups (0-31) can be loaded. With the ETS, KNX devices can be programmed via LAN. 5 tunneling servers are available for this and for other clients. The IP address of the IPR/S can be set or received by a DHCP server. The power supply is over 12..30 W DC or alternating via Power-over-Ethernet (Poe) to IEEE 802.3af Class 1. Alternatiw to KNX Standard Communication (Multicast) can communicate up to 10 IPR/S 3.1.1 via Unicast.
€616.03
ABB 2CSF204592R3400 F204B-40/0,3 FI circuit breaker type B 4P,40A,300mA,short timeverz.,3kA,4TE
ABB 2CSF204592R3400 F204B-40/0,3 FI circuit breaker type B 4P,40A,300mA,short timeverz.,3kA,4TE
2-7 days
Fault current protection devices (Rccbs) offer personal and property protection as well as protection against electrically ignited fires according to DIN WDE 0100-410 and DIN WDE 0100-530. The F200 series fault current protection switches ensure protection against sinusoidal alternating currents, pulsating currents and smooth direct fault currents. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 ma) and fire protection (with I?n = 300 ma). They meet product standards for type A IEC/EN 61008-1, 61008-2-1, 61543 (WDE 0664 10, 11, 30) and type B DIN EN 62423 (WDE 0664-40). Areas of application are predominantly in industrial and commercial applications. The extensive range of accessories offers you everything you need for your installation tasks. The RCCB type B is suitable for non-linear circuits that can generate fault currents with smooth direct fault currents and with different (high/) frequencies. These components are located in electronic operating means such as frequency converters. The RCCB type B has a frequency range of 0...2 khz to detect the fault current and offer a high system availability.
€596.16
ABB 2CDG110162R0011 SA/S12.16.2.1 Switch actuator, 12 times, 16 A, REG
ABB 2CDG110162R0011 SA/S12.16.2.1 Switch actuator, 12 times, 16 A, REG
2-7 days
Switches independent electrical consumers via potential-free contacts 12 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16A-AC1 series is suitable for switching ohmic, inductive and capacitive loads.
€586.22
ABB 2CDG110122R0011 JRA/S8.230.2.1 Blind / roller shutter actuator, 8x, 230 V AC, manual operation, REG
ABB 2CDG110122R0011 JRA/S8.230.2.1 Blind / roller shutter actuator, 8x, 230 V AC, manual operation, REG
2-7 days
For controlling a maximum of eight independent 230 W AC drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.
€582.82
ABB 2CMA100179R1000 B24 113-100 transducer counter, M-bus “steel”, 3 phases, transducer connection 6A
ABB 2CMA100179R1000 B24 113-100 transducer counter, M-bus “steel”, 3 phases, transducer connection 6A
2-7 days
The following values are output via a seven-segment display with up to 7 digits: active energy (class 1), power, currents, voltages (L-L; L-N) and frequency both per phase and total. The communication can take place via the integrated interface M-Bus or via the infrared interface for connecting a KNX module. The energy meter has an output. This can optionally be used as a pulse output for outputting the active energy or as an alarm output. Up to 25 alarm values (swell values with time delay) can be set here. The counter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.
€570.57
ABB 2CDG120039R0011 FW/S8.2.1 Radio clock, 8 channels, REG
ABB 2CDG120039R0011 FW/S8.2.1 Radio clock, 8 channels, REG
2-7 days
The radio clock sends the current time and date to the bus. The time can optionally be received by a DCF or GPS antenna. Furthermore, the radio control clock is used for simple setting of time programs.
€566.35
ABB 2CKA006220A0024 6251/8 Sens/switch 8/8-f, REG
ABB 2CKA006220A0024 6251/8 Sens/switch 8/8-f, REG
2-7 days
Combination device with 8 binary inputs and 8 switching actuators. Conventional probes or auxiliary contacts can be connected to 8 channels. The information of the contact query can be used for controlling Busch-free@home® actuators or for detecting status information. The contact interrogation voltage is provided by the device itself. Maximum cable length for cable cross section 1.5 mm2
€558.40
close