List of products by brand Dehn

Dehn BXT BAS Basisteil für BLITZDUCTOR XT
Dehn BXT BAS base part for BLITZDUCTOR XT 4-pin
2-7 days
BLITZDUCTOR® XT base part BXT BAS 4-pole, universal through-clamp for accommodating the arrester module without signal calculation, the reliable grounding of the arrester module is produced by means of a snap-fit fastening by means of the hat rail support base, since no components of the protection circuit are located in the base part, the maintenance work is limited to the protective modules connection cross-section in a continuous connection material 0.08 - 4 mm
€29.04
Dehn 953200 berspannungsableiter Typ 3 DEHNrail M 2P 255
Dehn 953200 voltage arrester type 3 DEHNrail M 2P 255
Out-of-Stock
Overvoltage arresters DEHNrail M 2P 2552-pole, modular, plug-in overvoltage arrester to protect end devices of industrial electronicswidth 1TE, Defective indicatorConductor type 3 according to EN 61643-11Maximum continuous voltage: 255 V ac/dcTotal leakage current: 5 kAProtection level L/N: Prevention: 25 A gG or B 25 AEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family
Dehn 952510 DEHN DEHNguard DG M YPV SCI 1000
Dehn 952510 DEHN surge arrester DEHNguard DG M YPV SCI 1000
Out-of-Stock
Multi-pole surge arrester DEHNguard M YPV SCI, type 2 according to EN 50539-11 with three-stage DC switching device consisting of base part and plugged protective modules. Combined cutting and short-circuiting device with safe electrical separation in the protective module. To protect low-voltage consumer systems from overvoltages. For use according to IEC 60364-7-712:2002-05 (building photovoltaic supply systems).Overvoltage arrester DEHNguard M YPV SCI 1000Multi-pole, modular, pluggable photovoltaic conductor up to 1000 V DCwith 3-stage DC switch, width 3TEDefective indicatorType 2 according to EN 50539-11 Suitable for IEC 60364-712Safe electrical separation in the protection moduleMaximum PV voltage: Total leakage current: 40 kAProtection level: Short-circuit strength Iscpv: 10 kA
Dehn 952405 Überspannungsableiter Typ 2 DEHNguard M TNS 275 FM
Dehn 952405 Overvoltage arrester type 2 DEHNguard M TNS 275 FM
2-3 days
Overvoltage arrester DEHNguard M TNS 275 FM 4-pole modular, plug-in overvoltage arrester for 230/400 V TN-S systems, width 4TE with telecommunication contact arrester type 2 according to EN 61643-11 defect indicator Maximum continuous voltage: 275 V ac Protection level:
€102.30
Dehn 952400 Überspannungsableiter Typ2 4pol TNS 275V 4x40kA
On sale!
Dehn 952400 Overvoltage arrester type2 4pol TNS 275V 4x40KA
2-4 Tage
Overvoltage arrester DEHNguard M TNS 2754-pole, modular, pluggable overvoltage arrester for 230/400 V TN-S systems, width 4TE Conductor type 2 according to EN 61643-11Defective indicatorMaximum continuous voltage: 275 V ac Protection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4Head of the Red/Line family
€83.40
Dehn 952315 DG M TT 275 FM Überspannungsableiter Typ 2 DEHNguard
Dehn 952315 DG M TT 275 FM surge arrester type 2 DEHNguard
2-7 days
DEHNguard® M TT complete 4-pole circuit for TT systems with 230/400 V / 50 Hz nominal voltage (circuit variant 3+1), multi-pole surge arrester DEHNguard M, type 2 according to EN 61643-11, consisting of base part and plugged protective modules, high device safety by arrester monitoring with thermodynamic control, for protection of low voltage consumer systems against overvoltage.Overvoltage arrester DEHNguard M TT 275 FM4-pole, modular, pluggable overvoltage arrester for 230/400 V TT and TN-S systems, width 4TE with telecommunication contactConductor type 2 according to EN 61643-11Defective indicatorMaximum continuous voltage: 275 V acProtection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family
€148.50
Dehn 952310 Überspannungsableiter DG M TT 275
Dehn 952310 Overvoltage arrester DG M TT 275
1-3 days
Overvoltage arrester DEHNguard M TT 2754-pole, modular, pluggable overvoltage arrester for 230/400 V TT and TN-S systems, width 4TEConductor type 2 according to EN 61643-11Defective indicatorMaximum continuous voltage: 275 V acProtection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family Factory: DEHN + SÖHNE Type: DG M TT 275 Art. No: 952310
€105.33
Dehn 952305 DG M TNC 275 FM ÜS-Ableiter
Dehn 952305 DG M TNC 275 FM ÜS-conductor
2-7 days
TNC modular complete 3-pin circuit for TN-C systems with 230/400 V / 50 Hz - nominal voltage, multi-pole, modular overvoltage conductors in functional abduct design, for protection of low-voltage consumer systems against overvoltages, for use in lightning protection zone concept at interfaces 0B - 1 and higher, conductor type 2 according to EN 61643-11, ready-to-connectOvervoltage arrester DEHNguard M TNC 275 FM3-pole, modular, plug-in overvoltage arrester for 230/400 V TN-C systems, width 3TEwith telecommunication contactConductor type 2 according to EN 61643-11Defective indicatorMaximum continuous voltage: 275 V acProtection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family Factory: DEHN Type: DG M TNC 275 FM Art. No: 952305 or equivalent.
€105.60
Dehn 952300 Überspannungsableiter DEHNguard M TNC 275 Typ2 3pol TNC 275VAC 3x40kA
On sale!
Dehn 952300 Überspannungsableiter DEHNguard M TNC 275 Typ2 3pol TNC 275VAC 3x40kA
1-3 days

Überspannungs-Ableiter DEHNguard M TNC 2753-poliger, modularer, steckbarer Überspannungs-Ableiter für TN-C-Systeme, Breite 3TE Ableiter Typ 2 nach EN 61643-11DefektanzeigeHöchste Dauerspannung: 275 V acSchutzpegel: <= 1,5 kVNennableitstoßstrom: 20 kAKurzschlußfestigkeit: 50 kAeffEnergetische Koordination nach DIN EN 62305-4 Ableiter der Red/Line-Familie Fabrikat: DEHN + SÖHNE Typ: DG M TNC 275 Art.-Nr.: 952300
€74.75
Dehn 952200 Überspannungsableiter Typ 2 DEHNguard M TN 275
Dehn 952200 surge arrester type 2 DEHNguard M TN 275
Out-of-Stock
Multi-pole surge arrester DEHNguard M, type 2 according to EN 61643-11, consisting of base part and plugged protective modules. High device safety due to thermal dynamic control. To protect low-voltage consumer systems from overvoltages. For use in the flash protection zone concept at the interfaces 0B– 1 and higher.
Dehn 952070 Überspannungsableiter Typ 2 DEHNguard S 1-polig Uc 275V AC
Dehn 952070 Overvoltage arrester type 2 DEHNguard S 1-pole Uc 275V AC
2-7 days
Single-pole surge arrester DEHNguard S, type 2 according to EN 61643-11, consisting of base part and plugged protective module. High device safety due to thermal dynamic control. To protect low-voltage consumer systems from overvoltages. For use in the flash protection zone concept at the interfaces 0B– 1 and higher.Overvoltage arrester DEHNguard S 2751-pole, modular, plug-in surge arresterwidth 1TE, Defective indicatorConductor type 2 according to EN 61643-11Maximum continuous voltage: 275 V ac/350 V dcProtection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family
€54.12
Dehn 941400 Überspannungsableiter Typ 1+2 3pol+NPE TNS 255VAC 4x12,5A
On sale!
Dehn 941400 Overvoltage arrester type 1+2 3pol+NPE TNS 255VAC 4x125A
2-5 days
Multi-pole, application-optimized combination arrester DEHNshield, type 1 + type 2 according to EN 61643-11 based on spark gaps. For the protection of residential buildings and for use in special applications. Enables terminal protection. For protection against overvoltages, even with direct flashes. Useable according to the flash protection zone concept at interfaces 0A– 2.
€230.45
Dehn 941316 DSH B TT 255 FM Kombi-Ableiter Typ 1 + 2
Dehn 941316 DSH B TT 255 FM Combi Type 1 + 2
2-7 days
DEHNshield® multi-pole combination arrester DEHNshield Basic, type 1 + type 2 according to EN 61643-11 based on spark gaps. Space-saving spark gap technology with only 1 TE / pole allows compact design. To protect residential buildings when retrofitting or refurbishment. Enables terminal protection. Meets all requirements of DIN VDE 0100-534 and DIN VDE 0100-443. Can be used directly at the feed point of the electrical system.Combi Devi Shield B TT 255 FM4-pin combination conductor for 230/400 V- TT- and TN (C) -S systems, Width 4 TE, with telecommunication contact Conductor type 1 + type 2 according to EN 61643-11Meets all requirements of DIN VDE 0100-534 and DIN VDE 0100-443spark gap technology with downstream current limitation Defective indicator Maximum continuous voltage: 255 V AC Protection level: Flash current (10/350): 30 kA Energetic coordination according to DIN EN 62305-4 Conductor of the Red/Line family, as well as directly to the terminal
€290.40