List of products by brand OBO BETTERMANN

Channel bottom with bottom hole for direct wall mounting. The top is to be ordered separately.

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall.

End piece for closing the GEK-K device installation channels.

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall.

Anchor rail perforated, 10.5x30mm 2000x41x21, St, FS

End piece for closing the GK device installation channels.

Channel bottom with bottom hole for direct wall mounting. The top is to be ordered separately.

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall. Each delivery length includes 4 upper clamps.

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall.

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall.

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall. Each delivery length includes 4 upper clamps.

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 7 x M25 5 x M32 seals, or the seals were cut in with a knife at the intended locations to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 176x135x67 Cover with labeling field and sealable.

potential compensation rail for potential compensation according to DIN VDE 0100-410/-540 as well as lightning potential compensation according to DIN VDE 0185-305. Base plate and cover made of polystyrene, grey, cover hood plombable / inscribable, contact strip made of brass, nickel-plated, steel screws and cantilever, galvanically galvanized, flash current-bearing 50 kA (10/350). Connection options: 7x single- or multi-wire lines up to 25 mm2 or fine-wire lines up to 16 mm2, 1x round conductor Rd 8-10, 1x flat band to FL30 or round conductor Rd 8-10.

The T-series cable branch boxes are all UV-resistant. They consist of a thermoplastic polypropylene with plug-in seals of ethylene vinyl acetate EVA. This plastic is soft, that is, it can move. Thus, lines through the 7×M25 seals can be installed or the seals are cut in with a knife at the intended points in order to produce an insertion opening for lines or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5 x 9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 77x77x46 mm

Cable branch box with clamping cover for indoor and outdoor areas. The screwless, fixed clamping cover allows quick and secure mounting.