List of products by brand Metz Connect

19 inch 1HE module carrier with 24 individual modules C6A module 180 ° // GHMT Cat.6A re-embedded PVP certified // Cat.6A component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 210 x 297 mm see accessories // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

19 Inch 1HE Module support with 24 E-DAT modules // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA 210 x 297 mm see accessories // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

80W stainless steel module support with 24E-DAT modules // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

IP44 can, with two keys with the same lock (same locks and keys) // lid closes completely, even with inserted patch cables // For two individual modules in modular design (not suitable for OpDAT modules) // Ball throw-proof according to DIN 18032 // can be operated with commercially available patch cables // well visible labeling field // Housing lower part rotatable by 180 degreesProduct description on the Manufacturer page

6 Port-Aufputz Distribution or connection box for structured building wiring // GHMT Cat.6 12C-de-embedded // Compliance with the class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173AW-1:2011-09 // Tested: Link to 500 MHz // for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPE). With marking of the core colors according to TIA/EIA 568A // View windows for enclosed label inserts // additional strain relief by cable tie possible // Variants: pure white, light greyProduct description on the Manufacturer page

// Stable steel plate housing // Housing upper part powder-coated in RAL9010 // easy installation and removal of the housing upper part by screw-free fastening // Potential compensation via flat plugs possible // Additional cable strain relief on the housing lower part with cable tie // The housing is suitable for direct wall mounting, as a desktop and with support rail adapter mini for support rail mounting // The housing bottom of the 3-port and 4-port version can be removed. Here there is the additional fastening option via a 60 mm hole track // Optionally available and usable in all housings: FO extension set for module and Keystone AP housing 130861-MSK-E // Optionally available for housings 2 x 12 Port: Tension relief for patch cables 130861-24ZE-E // Variants: 3, 4, 6, 8, 12, 16 and 2 x 12 PortsProduct description on the Manufacturer page

Cable sharing adapter for the simultaneous operation of two 4-wire services, here: 2 x telephone (ISDN), via an 8-wire installation line // Use in pairs: an adapter on the connection box, an adapter on the distributor // shielded adapter with transmission properties of class E in the link according to IEC 11801 Ed.2.2:2011-06 and DIN EN 50173-1:2011-09 // insertable side by side with narrow design //Product description on the Manufacturer page

Cable sharing adapter for simultaneous operation of two 4-wire services, here: 1 x Ethernet and 1 x telephone (ISDN), via an 8-wire installation line // Use in pairs: an adapter on the connection box, an adapter on the distributor // shielded adapter with transmission properties of class E in the link according to IEC 11801 Ed.2.2:2011-06 and DIN EN 50173-1:2011-09 // 1 x Ethernet formProduct description on the Manufacturer page

Cable sharing adapter for the simultaneous operation of two 4-wire services, here: 2 x Ethernet, via an 8-wire installation line // Use in pairs: an adapter on the connection box, an adapter on the distributor // shielded adapter with transmission properties of class E in the link according to IEC 11801 Ed.2.2:2011-06 and DIN EN 50173-1:2011-09 // 2 x Ethernet to 100 MBit E / Fast EthernetProduct description on the Manufacturer page

19 inch 1HE stainless steel module carrier for 24 individual modules in modular design // additional strain relief on the patch panel possible // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules are connected via the stainless steel module carrierProduct description on the Manufacturer page

19 inch 1HE module carrier for 24 individual modules in modular design // module carrier front made of silver anodized aluminum // module holder made of plastic with dust protection flaps (further colors available as accessories) removable forward // integrated cable collection, additional strain relief possible // window for enclosed labeling insert // labeling sheet 210 x 297 mm see accessories // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

// Stable steel plate housing // Housing upper part powder-coated in RAL9010 // easy installation and removal of the housing upper part by screw-free fastening // Potential compensation via flat plugs possible // Additional cable strain relief on the housing lower part with cable tie // The housing is suitable for direct wall mounting, as a desktop and with support rail adapter mini for support rail mounting // The housing bottom of the 3-port and 4-port version can be removed. Here there is the additional fastening option via a 60 mm hole track // Optionally available and usable in all housings: FO extension set for module and Keystone AP housing 130861-MSK-E // Optionally available for housings 2 x 12 Port: Tension relief for patch cables 130861-24ZE-E // Variants: 3, 4, 6, 8, 12, 16 and 2 x 12 PortsProduct description on the Manufacturer page

Particularly suitable for non-shielded and shielded Class EA systems // fully shielded Cat.6A patch cable AWG 26/7 // two shielded RJ45 connectors, wiring 1 - 1 // cable type: S/FTP 4x2xAWG 26/7 PIMF // Cable sheath LSHF(LSOH), halogen-free // Cat.6A Component Test according to ISO/IEC 11801 Ed. 2.2 (2011-06) and IEC 61935 Ed. 3.0 (2010-07), GHMT certified // Class EA Link up to 500 MHz according to ISO/IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1: 2011-09 // for 10GBit Ethernet(IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT can be slightly sprayed with integratedProduct description on the Manufacturer page

for the connection/extension of data cables up to Cat.7A // IP67 Protection by special shrunk tube // in connection with Cat.6, Cat.6A, Cat.7A and Cat.7A cable and Cat.6 connection technology will meet class E according to ISO/IEC 11801 Ed.2.2:2011-06 // connection of data lines AWG26/1 - 22/1 (one-wire) // cable lead from one or two sidesProduct description on the Manufacturer page

Particularly suitable for non-shielded and shielded Class EA systems // fully shielded Cat.6A patch cable AWG 26/7 // two shielded RJ45 connectors, wiring 1 - 1 // cable type: S/FTP 4x2xAWG 26/7 PIMF // Cable sheath LSHF(LSOH), halogen-free // Cat.6A Component Test according to ISO/IEC 11801 Ed. 2.2 (2011-06) and IEC 61935 Ed. 3.0 (2010-07), GHMT certified // Class EA Link up to 500 MHz according to ISO/IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1: 2011-09 // for 10GBit Ethernet(IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT can be slightly sprayed with integratedProduct description on the Manufacturer page